ALIGN WING CARBON
Align Wing Carbon builds on the hugely popular Align but giving a higher 70mm outer edge and tapered angle towards the end of the aerobar extension. Made from carbon fibre, Align Wing Carbon are rated for >1600N of force applied to the edge of the wing, keeping you locked in the aero position, safe and secure.
STABILITY/COMFORT/BIOMECHANICS
High outer edges help reduce unwanted movement, and removable 8mm Neoprene® foam allows for a comfortable support for your arms. Align Wing Carbon has 70mm high sides and a 90mm long base section. The slotted 5.5mm bolt holes are compatible with M4, M5 and M6 bolts, and give angular adjustment, a large range of fore/aft adjustment as well as side/side movement. Steel washers are included in the pack for use with flat head bolts. Please note flat head bolts (not included) must be used (not tapered V head bolts).
FITTING INSTRUCTIONS
Simply remove your current aerobar arm rests and replace with Align Wing Carbon. Minimum mounting point contact area 25mmx30mm (each side).
Please refer to your aerobar manufacturer’s recommend torque settings during installation – longer/shorter bolts may be required if your current armrests are less/more than 3mm thick – please note bolts are not included as different sizes and lengths are required for each manufacturer’s aerobar.
DIMENSIONS (UCI LEGAL)
Height: 70mm
Length: 90mm
Width: 100mm
Base thickness: 3mm
Bolt compatibility: M3, M4, M5, M6
Foam: 10mm velcro backed
Weight: 100g/pair